Mold Inspections & Testing Brevard County Florida

licensed-certified-mold-inspection-brevard-florida
Licensed, Certified Mold Inspection & Testing Brevard County, FL

If you suspect a mold-related issue or an underlying moisture problem that could be contributing to mold growth, your first step should be to consider a mold inspection with mold testing. A licensed and certified mold inspector in Brevard County Florida will be able to identify the mold problem, determine the cause of the problem and develop a mold remediation solution.

Through mold testing we will be able to determine if you have elevated indoor mold counts, how elevated and what species of mold is present. If you suspect indoor mold growth in your home, basement, attic, crawl space or commercial building, or if you are concerned about black mold or toxic mold, call Mastertech of Brevard today! 321-307-2022.

Our mold inspectors are fully trained, licensed and certified to perform mold inspections and mold testing throughout Brevard County Florida. If you need a a professional mold inspection in Brevard County FL, our trusted mold inspectors have the necessary skills, tools and knowledge to help.

What to expect from a Mastertech of Brevard Mold Inspection:

01

Visual Inspection:

The first step of every residential or commercial mold inspection or mold assessment, is a complete visual inspection (interior & exterior). Your mold inspector will look for any/all conditions that could be contributing to mold development.

02

Digital Documentation:

Thorough documentation is important for the both our inspector and our client. Detailed documentation will provide a clear reference for the findings. Digital imaging is the easiest way for your mold inspector to relay his or her findings. We’ll take pictures of all the areas of concern so you see exactly what we saw during your mold inspection.

03

 Thermal Imaging:

Damp or wet building materials are almost always cooler than dry materials. Our inspectors will use thermal imaging cameras (or infrared cameras) to detect temperature differences in (and often behind) building materials. With this information, your inspector will be able to map out moisture patterns and trace the moisture source.

04

Moisture Mapping:

Since mold needs moisture to develop and thrive, finding that source of moisture is very important. Moisture mapping basically allows us to locate building materials that are damp or wet enough to support mold growth. Testing for moisture also helps us determine if water leaks have been resolved or if they are actively leaking and can locate where water damage starts and stops.

05

Airborne Mold Testing:

Your mold inspector may need to collect air samples to determine if your indoor mold spore levels are higher than they should be.

06

Surface Mold Testing:

Is it just water staining, or is it mold? Surface testing with mold swabs or bio tape lifts will answer those questions. In many cases, surface testing isn’t necessary if mold growth is visibly obvious.

07

Inner Wall Mold Testing:

When mold is suspected behind a wall or above a ceiling, those areas should be tested. Today’s mold testing technologies and techniques allow mold inspectors to take air and surface samples from wall or ceiling voids without causing unnecessary damage to the property.

08

Mold Inspection Summary Report:

Your inspector will compile all of the findings, including all the information gathered on site and a detailed discussion of the mold testing lab report, to generate a clear, concise and easy to read report.

09

Scope of Work:

Upon request, your mold inspector will design a mold remediation plan specific to your property. Your scope of work will include cleanup suggestions as well as preventative measures that are necessary to keep mold from returning.

10

PRV Testing (Post Remediation Verification Testing):

Also referred to as clearance testing. This is a mold inspection after the remediation is complete. Since we’re removing a bio hazard, It’s important to know that the job was done right – the first time. PRV Testing will determine if cleanup efforts were successful or if further cleanup is necessary.

Mastertech Environmental is certified to perform mold inspections and mold testing throughout Brevard County Florida. We take pride in our detailed and thorough approach. Each Mastertech mold inspector is carefully trained and follow strict safety protocols.

mold-inspection-services-brevard-FL
Mastertech of Brevard Mold Inspection Process:

  • A thorough visual inspection of the residential or commercial property (inside & out).
  • Digital documentation of our findings.
  • Thermal imaging (Infrared Camera Inspection) of potential problem areas.
  • Moisture mapping in areas where water intrusion may be a problem.
  • Indoor airborne mold testing to determine if mold levels are elevated inside your home or business.
  • Swab or bio tape mold samples to determine if mold is present on surfaces or belongings.
  • Inner wall testing to determine if mold is present in wall or ceiling voids.
  • A detailed report outlining what we did, what we found, where we found it and what to do next.

Professional Mold Inspection Service Areas Brevard County FL:

Satellite Beach, Palm Bay, Melbourne, Melbourne Beach, Cape Canaveral, Rockledge, Cocoa, Cocoa Beach, Titusville

If you have any questions about a mold inspection or mold testing, we would be happy to go through the process with you over the phone. Call us today 321-307-2022.


Contact us today to speak with a specialist 321-307-2022. Or fill out the form below and a team member will be in touch with you shortly.

Take the Next Step

Help is a click or call away.

Get Help Now

RECOGNITION & AFFILIATIONS

Before You Call Just Any Mold Removal Company…

Read our “Things to Consider” guide for choosing the right mold removal professional.

Get the Guide